Meinberg GPS167LCD-MP Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Sprzęt komputerowy Meinberg GPS167LCD-MP. Meinberg GPS167LCD-MP User Manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj

Podsumowanie treści

Strona 1 - GPS167LCD-MP

Technical InformationOperating InstructionsFUNKUHRENGPS167LCD-MP

Strona 2 - Impressum

10Pulse OutputsThe pulse generator of GPS167 generates pulses once per second (P_SEC) and onceper minute (P_MIN). Additionally, master frequencies of

Strona 3 - Table of Contents

11DCF77 EmulationThe GPS167 satellite controlled clock generates TTL level time marks (active HIGH)which are compatible with the time marks spread by

Strona 4

12InstallationMounting the AntennaThe GPS satellites are not stationary but circle round the globe in a period of about 12hours. They can only be rece

Strona 5

13Assembly with CN-UB/ECN-UB/Emax. 1.5mmale type NGPSAntennamale type Nmale type Nmale N-Norm30m20m(Max. total cable length: 250m)10MHzSWIT CHED2.048M

Strona 6

14Antenna Short-CircuitIn case of an antenna line short-circuit the following message appears in the display:ANTENNA SHORT-CIRCUIT DISCONNECT POWE

Strona 7 - General Information

15The Front Panel LayoutFAIL LEDThe FAIL LED is turned on whenever the TIME_SYN output is low (receiver is notsynchronized).LOCK LEDThe LOCK LED is tu

Strona 8

16NEXT KeyWhen editing parameters (LCD cursor is visible) this key moves the cursor to the nextdigit rsp. to the next parameter to be edited. If the c

Strona 9 - Time Zone and Daylight Saving

17Menu RECEIVER POS.This menu shows the current receiver position. The NEXT key lets the user select oneof three formats. The default format is geogra

Strona 10 - Asynchronous Serial Ports

18Menu SV POSITIONThis menu gives information on the currently selected satellite (SV). The satellite´s IDnumber, its elevation, azimuth and distance

Strona 11 - DCF77 Emulation

19Menu SETUPFrom this menu, several topics can be selected which let the user edit parameters orforce special modes of operation. A specific topic can

Strona 12 - Installation

ImpressumWerner MeinbergAuf der Landwehr 22D-31812 Bad PyrmontPhone: ++49 52 81 - 9309-0Fax: ++49 52 81 - 9309-30Internet: http://www.meinberg.deEma

Strona 13 - Assembly with CN-UB/E

20SETUP TIME ZONEThis menu lets the user enter the names of the local time zone with daylight savingdisabled and enabled, together with the zones´ tim

Strona 14 - Powering Up the System

21SETUP: DAYLIGHT SAV OFFDAYLIGHT SAV OFF Date: 25.10.****Day Of Week: SUN Time: 3:00:00If no changeover in daylight saving is wanted, an i

Strona 15

22SETUP SERIAL PORT PARMUsing this topic the user can enter transmission speed and framing of the serial ports.Default parameters are:COM0: 19200 baud

Strona 16 - Root Menu

23The following time strings can be selected:- Meinberg Standard String- GPS167 Capture String- SAT String- UNI-Erlangen String- NMEA String (RMC)- SP

Strona 17 - Menu SV CONSTELLATION

24SETUP INITIAL POSITIONWhen the receiver is primarily installed at a new location far away from the lastposition saved in the receiver´s memory the s

Strona 18 - Menu USER CAPTURE

25INIT GPS PARMSThis menu lets the user initialize all GPS datas, i.e. all saved satellite datas will becleared. The user has to acknowledge this menu

Strona 19 - SETUP ENABLE OUTPUTS

26ANTENNA CABLEThis menu asks the user to enter the length of the antenna cable. The received timeframe is delayed by approx. 5ns per meter antenna ca

Strona 20 - SETUP DAYLIGHT SAV ON/OFF

27Firmware UpdatesWhenever the on-board software must be upgraded or modified, the new firmware canbe downloaded to the internal flash memory via the

Strona 21 - +8 hours to UTC.)

28Technical Specifications GPS167LCD-MPHOUSING: Metal desktop case, MULTIPAC SchroffFront panel: 1 U / 84 HP (43.6 mm high / 426.4 mm wide)PROTECTIONR

Strona 22 - SETUP SERIAL STRING TYPE

29Rear View GPS167LCD-MPCOM3RS-232591610MHzswitched switched48kHzPULSE OUTPUT COM1 COM0TIME CAPTURE RS-232 RS-232ANTENNA100 ... 240V AC50/60 Hz1659591

Strona 23 - SETUP SERIAL STRING MODE

Table of ContentsImpressum ... 2General Information ...

Strona 24 - INIT USER PARMS

30Pin Assignments of the SUB-D Connectors165916591659CE LabelThis device conforms to the directive 89/336/EWG on the approximation of the laws of the

Strona 25 - FORCE BOOT MODE

31Technical Specifications GPS167 (OCXO-LQ)RECEIVER: 6 channel C/A code receiver with externalantenna/converter unitANTENNA: Antenna/converter unit wi

Strona 26 - Resetting Factory Defaults

32ACCURACY OFFREQUENCY: after sync. and 20 min of operation ±1.10-9during first 20 minutes of operation ±2.10-8GPS synchronous, 24h averaged ±1.10-11A

Strona 27

33PHYSICALDIMENSION: Eurocard, 100 mm x 160 mmREAR EDGECONNECTOR: according to DIN 41612, type C 64, rows a+c (male)RF CONNECTOR: coaxial BNCAMBIENTTE

Strona 28 - Front/Rear Panel Connectors

34Technical Specifications GPS167 AntennaANTENNA: dielectrical patch antenna, 25 x 25mmreceive frequency: 1575.42 MHzbandwidth: 9 MHzCONVERTER: local

Strona 29 - Rear View GPS167LCD-MP

35Time StringsFormat of the Meinberg Standard Time StringThe Meinberg Standard Time String is a sequence of 32 ASCII characters startingwith the STX (

Strona 30 - CE Label

36Format of the GPS167 Capture StringThe Meinberg GPS167 Capture String is a sequence of 31 ASCII characters termina-ted by a CR/LF (Carriage Return/L

Strona 31

37Format of the SAT-Time StringThe SAT-Time String is a sequence of 29 ASCII characters starting with the STX(start-of-text) character and ending with

Strona 32

38Format of the Uni Erlangen String (NTP)The time string Uni Erlangen (NTP) of a GPS-clock is a sequence of 66 ASCIIcharacters starting with the STX (

Strona 33

39i leap second insertion‘L’ leap second is actually inserted(active only in 60th sec.)‘ ‘ (space, 20h) no leap second is insertedbbb.bbbb latitude of

Strona 34

Menu GOOD SVS 24HOURSS MIN/MAX ... 18Menu USER CAPTURE ... 18Menu SETU

Strona 35 - Time Strings

40Format of the NMEA 0183 String (RMC)The NMEA String is a sequence of 65 ASCII characters starting with the ‘$’ characterand ending with the characte

Strona 36

41Format of the ABB SPA Time StringThe ABB SPA Time String is a sequence of 32 ASCII characters starting with thecharacters ">900WD" and

Strona 37 - Format of the SAT-Time String

42Format of the Computime Time StringThe Computime time string is a sequence of 24 ASCII characters starting with the Tcharacter and ending with the L

Strona 39

44Signal Description GPS167Name Pin FunctionGND 32a+c GroundVCC in (+5V) 1a+c +5V supplyVCC in (+12V) 2a+c +12V supplyVCC in (+5V) 3a+c +5 V supply (T

Strona 40

45Rear Connector Pin Assignments GPS167ac1 VCC in (+5V) VCC in (+5V)2 VCC in (+12V) VCC in (+12V)3 VDD in (TCXO/OCXO) VDD in (TCXO/OCXO)4 (reserved,

Strona 41

46Technical Specifications Power Supply T-60BINPUT: 85 ... 264V AC, 47 ... 63Hz, 1A/230V, 2A/115VFUSE: elektronicCURRENTLIMITING: 105 - 150% Iout nomO

Strona 42

47Menu Quick Reference GPS167LCD-MPNEXTCLR/ACKMENUNEXTMeinberg GPS167 S/N: 100xxx20REV:4.30 ED167 LCDGPS: NORMAL OPERATION Wed,

Strona 43

GPS167_LCD_MP- E- 23. 09. 04

Strona 44 - Signal Description GPS167

Format of the SAT-Time String... 37Format of the Uni Erlangen String (NTP) ... 38Format of the N

Strona 46

General InformationThe satellite receiver clock GPS167 has been designed to provide extremly precisetime to its user. The clock has been developed for

Strona 48 - GPS167_LCD_MP- E- 23. 09. 04

9The Modular System GPS167LCD-MPGPS167LCD-MP GPS-Receiver is a set of equipment composed of a satellite control-led clock GPS167 (LQ-OCXO) together wi

Komentarze do niniejszej Instrukcji

Brak uwag